Carrier 40MBC/38MAQ Installation Instructions Manual page 14

Grille Louver Motor Power.
Grille Display
5 Pin Port
10 Pin Port
Wired Remote Controller
Grille Display.
(Available as Accessory)
10 pin Molex plug to be
5 Pin Molex plug to be
connected to Control Board.
connected to Wired
Controller's cable
Grille Louver Motor Power.
5 Pin Molex plug to be
connected to Control Board
Fig. 30 --- Panel Cassette
6. Fasten the control box lid with two screws. 7. Close the intake grille, and close the two grille hooks.
Fig. 32 --- Close the Intake Grille
Fig. 31 --- Fasten the Control Box Lid
14