Carrier 40MBC/38MAQ Installation Instructions Manual page 12

Fig. 19 --- Drain Setup Pipe
INSTRUCTION
The slant gradient of the attached drain hose should be within 3 in.
(75 mm) so that the drain hole does not have to endure unnecessary
outside force.
Fig. 20 --- Slant Gradient
3
4
5
6
7
1. Install the drain hose according to the following process if
several drain hoses join together.
2. Check the smoothness of the drain after the installation.
Unit: in/mm
3. Check the drain state by draining 36 3/5 in. 3 (600 cc) of
water slowly from the outlet vent or test hole.
4. Check the drain in the state of refrigerating after installing
the electric circuit.
Fig. 23 --- Cassette
12
Fig. 21 --- Slant Gradient
Unit: in/mm
Fig. 22 --- Drain
1
2
1 Control box lid
2 Wiring diagram label
3 Power supply terminal block
4 Clamp for wiring
5 Wiring between units
6 Plastic cover
7 Clamp (field supply)