Table of Contents
Advertisement
4.2.4 WAN
Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and you would
like to change your Internet connection type. The WAN Settings screen allows to specify the type of WAN port
connect you want to establish with your ISP. The WAN settings offer the following selections for the router's
WAN port, Static IP, PPPoE, PPTP and DHCP Client.
Static IP address
Your ISP has given you an IP address already
DHCP Client
Your ISP will automatically give you an IP address. And then click on "Next".
PPPoE
Your ISP requires PPPoE connection
PPTP
Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP) connection.
4.2.5 Wireless Basic Setting
Choose the "WAN Type", "Wireless ISP" and "Apply" button for connecting to the wireless Access Point and
proceed to the manual's relevant sub-section.
Advertisement
Table of Contents
