Other Useful Functions; Outputting External Microphone Signals From The Speakers; Copying Cd Tracks To An Sd Card (Bb-1000Cd Only) - Tascam BB-800 Owner's Manual

8 – Other useful functions
Outputting external microphone signals
from the speakers
You can connect external microphones to this unit and use it
as an amplifier.
1 Press the key to open the INPUT screen.
INPUT
2 Use the [ / ] keys to select the SOURCE
CURSOR
§ ¶
item.
3 Use the wheel to select EXT/REAR or EXT/
DATA
LINE.
4 Use the [ / ] keys to select the EXT > SP
CURSOR
§ ¶
item.
5 Use the wheel to set it to ON, allowing the
DATA
sounds input from the external microphones to be
output through the speakers.
NOTE
This function is for outputting the sound input by
•
external microphones. Sound input from the built-in
microphones cannot be output through the speakers.
When using only one microphone, set MONO MIX to
•
ON to output the sound through both the left and
right speakers.
42
TASCAM BB-1000CD/BB-800
CAUTION
When EXT > SP is set to ON, do not point external
•
microphones toward the speakers. Doing so could
cause feedback.
Turning up the FRONT MIC/EXT MIC and VOLUME
•
knobs increases the probability of feedback. Please
use care when adjusting these.
Copying CD tracks to an SD card
(BB-1000CD only)
You can copy tracks from a CD to an SD card. The tracks
from the CD are copied to the currently open folder on the
SD card. To change the destination folder select the folder
on the BROWSE screen in advance.
1 Confirm that the unit is stopped.
2 Press the key to open the Home screen.
HOME
3 Press the key to open the MENU screen.
MENU
4 Use the wheel or
DATA CURSOR
COPY, and press the
ENTER
5 Use the wheel or
DATA CURSOR
CD > SD, and press the
[ / ] keys to select
§ ¶
key.
[ / ] keys to select
§ ¶
key.
ENTER