Compliance And Control Guidelines And Operating Instructions For Mobile Two-Way Radios Installed On Maritime Vessels - Vertex Standard VX-7200 Operating Manual

As with all fixed site antenna installations, it is the responsibility of the licens-

ee to manage the site in accordance with applicable regulatory requirements
and may require additional compliance actions such as site survey measure-
ments, signage and site access restrictions in order to ensure that exposure
limits are not exceeded.
For additional installation information, see the guidelines for minimum sepa-

ration distances provided above in the RF Exposure Compliance and Control
Guidelines and Operating Instructions section of this document.
Compliance and Control Guidelines and Operating Instructions
for Mobile Two-Way Radios Installed on Maritime Vessels
If mobile radio equipment is installed on a vessel and operated as a fixed unit, the
antenna installation must comply with the following requirements in order to en-
sure optimal performance and compliance with RF energy exposure limits in the
standards and guidelines listed above:
An antenna intended for Maritime operation should be chosen and installed

according to the manufacturers recommendations.
The antennas should be mounted solidly to the vessel structure at the highest

location possible.
As with all radio antenna installations, it is the responsibility of the operator to

maintain adequate distances from the antenna and all personnel on board the
vessel or adjacent to the vessel.
For additional installation information, see the guidelines for minimum Sepa-

ration distances proved above in the RF Exposure Compliance and Control
Guidelines and Operating Instructions section of this document.
8
P s
rOduCT
g
AFeTy uide
VX-7200 S
erieS
O M
perating anual