Compliance And Control Guidelines And Operating Instructions For Mobile Two-Way Radios Installed As Fixed Site Control Stations; Compliance And Control Guidelines And Operating Instructions For Mobile Two-Way Radios Installed On Maritime Vessels - Vertex Standard VX-2200 series Operating Manual

Compliance and Control Guidelines and Operating Instructions
for Mobile Two-Way Radios Installed as Fixed Site Control
Stations
If mobile radio equipment is installed at a fixed location and operated as a control
station or as a fixed unit, the antenna installation must comply with the following
requirements in order to ensure optimal performance and compliance with the RF
energy exposure limits in the standards and guidelines listed above:
The antenna should be mounted outside the building on the roof or a tower if

at all possible.
As with all fixed site antenna installations, it is the responsibility of the licens-

ee to manage the site in accordance with applicable regulatory requirements
and may require additional compliance actions such as site survey measure-
ments, signage and site access restrictions in order to ensure that exposure
limits are not exceeded.
For additional installation information, see the guidelines for minimum sepa-

ration distances provided above in the RF Exposure Compliance and Control
Guidelines and Operating Instructions section of this document.
Compliance and Control Guidelines and Operating Instructions
for Mobile Two-Way Radios Installed on Maritime Vessels
If mobile radio equipment is installed on a vessel and operated as a fixed unit, the
antenna installation must comply with the following requirements in order to en-
sure optimal performance and compliance with RF energy exposure limits in the
standards and guidelines listed above:
An antenna intended for Maritime operation should be chosen and installed

according to the manufacturers recommendations.
The antennas should be mounted solidly to the vessel structure at the highest

location possible.
As with all radio antenna installations, it is the responsibility of the operator to

maintain adequate distances from the antenna and all personnel on board the
vessel or adjacent to the vessel.
For additional installation information, see the guidelines for minimum Sepa-

ration distances proved above in the RF Exposure Compliance and Control
Guidelines and Operating Instructions section of this document.
8
p s
rOduct
VX-2200 ( LTR ) S
g
aFety uide
eRieS
O M
peRaTing anuaL