Descriptipon Of Operating Functions - Vertex Standard VX-450 SERIES Operating Manual

(VHF) FCC ID:K6610943020, IC:511B-10943020 / (UHF) FCC ID:K6610944720, IC:511B-10944720
Description of Operating Functions
M
ONITOR
Press the assigned Programmable key to cancel
CTCSS- and DCS-controlled squelch; the BUSY/TX
indicator will glow green. Press and hold this button
for 2 seconds to hear background noise (unmute the
audio); the BUSY/TX indicator will blink green.
L
AMP
Press the assigned Programmable key to illuminate
the LCD for five seconds.
L
OCK
Press the assigned Programmable key to lock the CH
Selector knob, Programmable keys, and PTT switch.
The precise lockout configulation is programmed by
your Dealer.
16
A O
DVANCED PERATION
S
CAN
The Scanning feature is used to monitor multiple sig-
nals programmed into the transceiver. While scan-
ning, the transceiver will check each channel for the
presence of a signal, and will stop on a channel if a
signal is present.
To activate scanning:
Press the assigned Programmable key to activate
scanning.
The scanner will search the channels of each chan-
nel, looking for active ones; it will pause each time
it finds a channel on which someone is speaking.
Press the assigned Programmable key again to dis-
able scanning. Operation will revert to the pro-
grammed revert channel.
Note: Your dealer may have programmed your ra-
dio to stay on one of the following channels if you
press the PTT switch during scanning pause:
Current channel ("Talk Back")
"Last Busy" channel
"Priority" channel
"Home" channel
"Scan Start" channel
VX-450 S O
ERIES PERATING
Vertex Standard Co.,Ltd.
M
ANUAL