Vertex Standard VX-7200 Operating Manual page 26

c s
ode et
Press the assigned PF key to change the 2-Tone encoding digit. To change the
tones, select the desired digit using the [ P1 ] / [ P2 ] keys, then change the number
using the [  ] / [  ] keys.
s d
Peed iAl
Your Dealer may have pre-programmed Auto-Dial telephone number memories
into your radio.
To dial a number, press the assigned PF key, then press the microphone's num-
bered key corresponding to the Auto-Dial memory number list provided by your
Dealer. The DTMF tones sent during the dialing sequence will be heard in the
speaker.
h c
oMe hAnnel
Press the assigned PF key to recall the pre-defined Home group/channel. When
you recall the Home group/channel, the "
s t
electAble one
Press the assigned PF key to select a sub-audible tone (CTCSS/DCS) from the
pre-defined tone table. You can operate the indicated sub-audible tone in Select-
able Tone mode.
h A
orn lert
Press the assigned PF key to turn the Horn Alert function "ON" or "OFF." If you
receive a call from the base station with 2-Tone or DTMF signaling, horn alert will
be activated and your vehicles horn will sound.
When you turn the Horn Alert "ON," a tone will sound and the "
will appear on the display.
P A
ublic ddress
Press the assigned PF key to use the transceiver as a PA amplifier. When you en-
able this function, a tone sounds and " Public ADRS " will appear on the display.
The public address can be used even while scanning and receiving a call.
EXT. ACC1
Press the assigned PF key to toggle output port on "1" "on" and "off."
eXt. Acc2
Press the assigned PF key to toggle output port on "2" "on" and "off."
24
A
dvAnCed
( hoMe )
O
PerATiOn
" icon will appear on the LCD.
VX-7200 S
erieS
" icon appears
O M
perating anual