Mf Model - Ricoh PE-P1 Service Manual

• If "Engine FW download completed" does not appear, the download failed. Try again. You can
also switch from an Ethernet connection to a USB connection and see if that works. If you still
cannot download the firmware, it may be necessary to change the EGB and/or the controller
board.
• If power failed during the download, try again. If you still cannot download the firmware, it may
be necessary to change the EGB and/or the controller board.
9. Turn the printer off and on.

MF Model

Checking the Machine Firmware Version
1. Turn the machine on.
2. If the printer driver is not installed on your PC, install the printer driver now.
3. Press "Menu" and select "Report Print" with the "Up" or "Down" key.
4. Press "OK" and select "Maintenance Page" with the "Up" or "Down" key.
5. Press "OK" to display the "Firmware version (Controller)" and "Engine FW version"
Updating the Controller Firmware
1. Make a folder in your computer.
2. Save the files (".dwn", "/ini" and ".exe") in the folder.
3. Click the exe file to execute the updating program.
Firmware Updating
5
155