Service Menu (MF Model)
Overview
The MF model has several service menus. Each service menu has several adjustment items. This section
explains how to enter each service menu and what you can do in each service menu.
Each menu is classified into two "Modes" depending on how you enter the service menus.
• "Menu Mode" can be executed by pushing a sequence of keys.
• "Special Mode" can be executed if you press certain keys at the same time as you turn the power on.
Each menu is classified as follows:
Menu Mode
Maintenance Mode Menu
Special Mode
Reseller Default Settings Menu
Fax Service Test Menu
Maintenance Mode Menu
Entering the Maintenance Mode Menu
1. Turn on the machine.
2. Press these keys in the following order:
"Clear/Stop", "1", "0", "7" and "Color Start"
3. "Maintenance Mode" is displayed on the LCD.
This is a menu for maintenance and service.
This is a menu for initializing all information stored in the
controller, except for some counters.
• These counters are initialized: Print/Scan/Copy/Fax
functional Counter, Jam Counter
• These counters are not initialized: Printer/Scanner
Engine Counter, which are printed in the
"Configuration Page".
After initializing with this menu, when the user powers on
the machine, the Initial Setup Menu appears. The user must
select Language in Country in this menu.
This is a menu for checking the fax mode.
Service Menu (MF Model)
139
5