Initial Setup Mode - Panasonic KX-P2130 Operating Instructions Manual

Using the Control Panel
Initial Setup Mode
The following features (items) can be set in the Initial Setup mode through the Control Panel; Emulation, Auto Line
Feed, Graphic Direction, Page Length and the optional Auto Cut Sheet Feeder (KX·PT12), if installed. These
features can also be set using the Setup Disk (aw P. 31).
1
t
~
POWER
• I ON
OOFF
2
4
.,t;;;:-L~~
LINE indicator
~
c
SUPER
ON LINE TEAR
QUIET
OFF
POWER
C PAPER OUT
---""-A--
48
Load a sheet of paper (w P. 19~25), and
turn the power off.
~ To enter the Initial Setup mode
While pressing [LOAD/PARK), turn the
power on.
Both FONT indicators and the Super Quiet indicator
will be blinking.
The current settings will be printed automatically.
~
Selecting the Item
Press and release I;:' ; :;F' - -O"NT' - ).
Each time you press [ FONT ), you will advance to the
next item. Select the desired item according to the
status of the FONT indicators (on, off, blinking).
(aw P. 49)
~ Setting the Item's status
Press and release [ON LINE ).
The item's status will change each time you press
[ON LINE).
To change the item's status, press (ON LINE ).
(wP.49)
To change additional settings, repeat steps 3 and 4.