Panasonic KX-P2130 Operating Instructions Manual page 76

Impact dot matrix printer
Hide thumbs Also See for KX-P2130:
Table of Contents

Advertisement

,
Glossary
'l
>
I
,
j
cps:
"cps" is an abbreviation for "characters per second", and means the
number of characters printed in one second.
CR (Carriage Return):
"CR" is a control code that returns the printhead to the left margin.
iii
Decimal (Dec.):
Decimal is a numbering system composed of 10 digits 0,1,2,3,4,5,6,7,
8 and 9.
Default:
Default has two meanings: one indicates the previously set conditions or
settings executed when the power is turned on, reset or initialized; and the
other indicates the original settings when shipped from the factory (Factory
settings).
Dot matrix printer:
An impact printer whereby wires (pins) strike the ribbon and subsequently a
dot prints on the paper. The software in the printer supplies the commands
which determine which pins are activated to form the appropriate
character(s).
Dots per inch (DPI):
A measure of resolution used for monitors and printers.
Double strike printing:
Double printing is a print quality enhancing mode which uses a double strike
with two passes of the printhead.
Double high printing:
Double high printing makes the height of a character twice that of a normal
one.
Double wide printing:
Double wide printing makes the width of a character twice that of a normal
one.
Download character:
Download character is a character which the user can design.
Draft:
Draft is one of three print qualities available on this printer. Draft mode uses
a minimum number of dots per character to maximize printing speed.
Emphasized printing:
Emphasized printing is a print quality enhancing mode done in one pass of
the print head at half speed, allowing horizontally adjacent dots to be printed
producing a darker character.
Emulation:
Emulation means to operate like another printer.
This printer can emulate the Epson LQ-860 or the IBM Proprinter X24E.
Escape (ESC) sequence:
"ESC" is a control code that begins most printer commands. The characters
which follow the "ESC" are interpreted as command, rather than characters
to print.
76

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-p2135

Table of Contents