Panasonic KX-P2130 Operating Instructions Manual page 58

:s:
'"
'"
-
C D
'" '"
'" .,
CD
Qa
-t
-
C I
C
CO"
CD
en
...
CI
CI
:::
'"
cc
Troubleshooting .
Platen Installation
1
2
3
4
5
58
Platen
m
haSSiS
II
Platen
Platen bushing (gray)
,/ Opening
Lower the platen into the openings of the chassis
(right side first).
Note:
• Make sure the metal washer on the left side of
the platen is on the outside of the chassis.
A Align the right platen bushing with the opening in
the chassis and slide the bushing into the
opening.
B Align the left platen bushing with the opening in
the chassis and slide the bushing into the
opening.
Rotate the platen bushings towards the front of the printer until they latch into place.
Reinstall the pull-up roller unit by hooking onto the front posts and rotating back until it snaps into place.
Reinstall the built-in sheet feeder, smoked plastic cover and platen knob.