Initial Setup Mode - Panasonic KX-P1131E Operating Instructions Manual

Initial Setup Mode

The 18 features (items) can be set in the Initial Setup
mode through the Control Panel. For the features and
the indicators condition, refer to Page 34. These
features can also be set through the Control Panel
Software program (Page 25).
1.
Load a sheet of paper (Page 20), and turn the
power off.
2.
While pressing
LOAD/PARK
power on to enter the Initial Setup mode.
Both FONT indicators and the HIGH SPEED
indicator will be blinking. The current settings will be
printed automatically.
3.
Press and
FONT
item.
Each time you press
you will advance to the next item. Select an item and
confirm the selection with the FONT indicators (A)
and ON LINE indicator (B) (on, off, blinking)
(Page 34).
A
, turn the
to select the
ON LINE
and
FONT ON LINE
B
4.
Press
PITCH
The item's status will change each time you press
(Page 34). To change additional
PITCH
settings, repeat step 3 and 4.
5.
Press
LOAD/PARK
mode.
The FONT indicators will go off and the current
conditions will print.
Note
•
To return all current settings to the factory
settings, follow the steps below.
1.
While pressing
,
the power on, then release.
2.
Press
3.
Press
Initial Setup mode.
Using the Control Panel
to set the item's status.
to exit the Initial Setup
LOAD/PARK
.
TEAR OFF
to exit the
LOAD/PARK
Operating Instructions
, turn
33