en
!a
c
"
Installing paper
4
Tractor clamping levers
5
6
7
20
o
o
o
Unlock the tractors by pulling the
tractor clamping levers forward.
f)
Slide the tractors to accommodate the
approximate width of the paper being
used.
In most applications, you will find that the
o
indicator on the tear bar is a useful tool for
predetermining your left most print position.
Open the tractor covers.
Load the fanfold paper from the rear of
the printer with the side on which you
wish to print facing down.
o
Align the paper sprocket holes with the
tractor pins, making sure the paper is
straight.
f)
Close the tractor covers.
o
Adjust the tractors to remove any slack
in the paper.
f)
Lock the tractors by pushing the
tractor clamping levers back.