How To Select A Pulselength; How To Change The Pulselength - Furuno FAR-1513 Operator's Manual

1. OPERATIONAL OVERVIEW
1.17

How to Select a Pulselength

The pulselength in use appears at the upper-left position of the screen using the indi-
cations shown in the table below.
S1 (short pulse 1)
S2 (short pulse 2)
M1 (medium pulse 1)
M2 (medium pulse 2)
M3 (medium pulse 3)
L (long pulse)
Appropriate pulselengths are preset to individual range scales and function keys. If
you are not satisfied with the current pulselength settings, you can change them as
shown in the procedure below.
1.17.1

How to change the pulselength

The pulselength can be changed using the procedure below.
1. Place the cursor in the [PULSE] box at the top left corner of the screen.
2. Press the left button, right button or rotate the ADJUST knob to cycle through
pulselengths. The order in which the pulselengths are cycled is shown in the table
below.
Left button
Right button
ADJUST knob (clockwise)
ADJUST knob (counter-clockwise)
Note: Available pulselengths are restricted depending on the range.
See the table below for details.
Range
0.5 NM
0.75 NM, 1.5 NM
3 NM
6 NM
12 NM, 24 NM
1-18
FAR-1518/FAR-1528
(PULSE) indication
Method
FAR-1518/FAR-1528
(PULSE)
indication
S1, S2
S1, S2, M1
S2, M1, M2, M3
M1, M2, M3, L
M2, M3, L
FAR-1513/FAR-1523
(PULSE) indication
S (short pulse)
M (medium pulse)
L (long pulse)
Cycle order
Decreases the pulselength.
Increases the pulselength.
Increases the pulselength.
Decreases the pulselength.
FAR-1513/FAR-1523
Range
1.5 NM S, M
3 NM M, L
(PULSE)
indication