Furuno FAR-1513 Operator's Manual page 169

Alert
Alert title
ID
601,7 SENSOR ERROR
Remedy: Press the ALERT ACK key. Check power and connection to AIS unit.
602,1 SENSOR CHANGE
Remedy: Press the ALERT ACK key. The indication is automatically removed when the signal is
restored or a different sensor is selected.
602,2 SENSOR CHANGE
Remedy: Press the ALERT ACK key. The indication is automatically removed when the signal is
restored or a different sensor is selected.
740,1 EXT RADAR ERROR Warning
Remedy: Press the ALERT ACK key. Restore the external radar to normal operating condition.
740,2 EXT RADAR ERROR Caution
Remedy: Press the ALERT ACK key. Check connection and power to the external radar.
790,1 ARRIVAL
Remedy: Press the ALERT ACK key. No other action required.
791,1 XTE
Remedy: Press the ALERT ACK key. Check course and adjust as necessary.
950,1 BAM COM ERROR
Remedy: Press the ALERT ACK key. Check connection to BAM. Check power to BAM.
APPENDIX 3 ALERT CODES, MESSAGES AND MEANINGS
Priority &
Category
Warning Message: "AIS COM ERROR"
Cat: B Meaning: No AIS data received for thirty seconds.
Caution Message: "POSN SOURCE CHG"
Cat: B Meaning: Positioning sensor input lost, automatically
changed sensors.
Caution Message: "SPD SOURCE CHG"
Cat: B Meaning: Speed sensor input lost, automatically
changed sensors.
Message: "EXT RADAR NO SIGNAL"
Cat: B Meaning: Externally connected radar has an error.
(Only displayed when Interswitch is active.)
Message: "EXT RADAR COM ERROR"
Cat: B Meaning: Communication with external radar inter-
rupted or lost. (Only displayed when Interswitch is ac-
tive.)
Warning Message: "ARRIVED AT WPT"
Cat: B Meaning: Ship has entered the destination arrival
alert zone.
Warning Message: "XTE ERROR"
Cat: B Meaning: Cross-track error, ship is off-course.
Caution Message: "COMMUNICATION ERROR WITH BAM"
Cat: B Meaning: Communication the Bridge Alert Manage-
ment System interrupted.
Message and meaning
AP-13