10How To Use The Ins Marker; 11How To Show/Hide Radar Map Marks; 12How To Set The Barge Marker - Furuno FAR-1513 Operator's Manual

1.41.10 How to use the INS marker
You can receive predicted position data by connecting this radar to an INS.
1. Open the [MAIN MENU].
2. Select [MARK], then push the ADJUST knob.
3. Select [INS MARK], then push the ADJUST knob.
4. Select [PREDICTOR], then push the ADJUST knob.
5. Select [ON], then push the ADJUST knob.
6. Close the menu.
1.41.11 How to show/hide radar map marks
You can show or hide marks on the radar map.
1. Place the cursor on the [MARK] box at the bottom of the screen, then press the
right button to open the [MARK] context menu.
2. Select [MAP DISPLAY], then push the ADJUST knob.
3. Select [ON] or [OFF] as appropriate, then push the ADJUST knob.
4. Close the menu.
1.41.12 How to set the barge marker
You can mark the locations of barges on the display with icons. Set up barge informa-
tion as follows:
1. Open the [MAIN MENU].
2. Select [MARK], then push the ADJUST knob.
3. Select [BARGE], then push the ADJUST knob.
4. Select [BARGE MARK], then push the ADJUST knob.
5. Select [ON] to display barge marks, [OFF] to hide barge marks, as appropriate,
then push the ADJUST knob.
6. Select [BARGE SIZE], then push the ADJUST knob. Use the ADJUST knob to
enter the [LENGTH] and [WIDTH] of the barge.
Rotate the ADJUST knob to increase or decrease the value of the highlighted dig-
it.
7. Select [ARRANGEMENT], then push the ADJUST knob. This item lets you set a
single barge or a barge chain. Select one of the five arrangements and rotate the
ADJUST knob. Select number of barges (max. 9) to display. As you rotate the AD-
JUST knob the squares light or extinguish and the number of barges selected ap-
pears at the right side.
First row of barge [ARRANGEMENT] is displayed
as the left side of the barge icon on-screen.
8. Close the menu. The barge mark is now displayed as shown in the figure above.
4
9
9
9
4
Own ship icon
1. OPERATIONAL OVERVIEW
X
1-59