How To Delete The Own Ship Track - Furuno FAR-1513 Operator's Manual

5.4.3

How to delete the own ship track

There are three methods to delete the own ship track: by percentage of track, by track
color or by cursor selection.
How to erase tracks by percentage
1. Open the [MAIN MENU].
2. Select [MARK], then push the ADJUST knob.
3. Select [OWN TRACK], then push the ADJUST knob.
4. Select [DELETE OWN TRACK], then push the ADJUST knob.
5. Select the percentage of the track you wish to delete, then push the ADJUST
knob. The available options are: [30%], [50%], [80%] or [ALL].
6. Close the menu.
How to erase tracks by color (For non-IMO type only)
1. Open the [MAIN MENU].
2. Select [MARK], then push the ADJUST knob.
3. Select [OWN TRACK], then push the ADJUST knob.
4. Select [DELETE OWN TRACK], then push the ADJUST knob.
5. Select the color of the track you wish to delete, then push the ADJUST knob. The
available options are: [RED], [GRN], [BLU], [YEL], [CYA], [MAG] or [WHT].
6. Close the menu.
How to erase tracks with the cursor (For non-IMO type only)
1. Open the [MAIN MENU].
2. Select [MARK], then push the ADJUST knob.
3. Select [OWN TRACK], then push the ADJUST knob.
4. Select [DELETE OWN TRACK], then push the ADJUST knob.
5. Select [2POINTS] or [AREA] as appropriate, then push the ADJUST knob. The
cursor jumps into the operational display area.
[2POINTS]: Delete track between two points
[AREA]: Delete all track within an area
[2POINTS] method
6. Place the cursor on the first point (A), then press the left button.
7. Place the cursor on the second point (B), then press the left button. If [AREA] was
selected at step 5, the two points form a square.
8. Close the menu.
Area to be deleted
A
B
5. VIDEO PLOTTER OPERATION
A
B
[AREA] method
5-5