Wired remote Controller Installation
Initializing Your Wired remote Controller Communication
If the number of indoor unit is decreased while you are using your remote control to control one indoor unit or a group of
indoor units, then you need to initialize your remote controller communication.
Press the [
] and [Set] buttons at the same time for more than five seconds.
f Your Wired Remote Controller will be initialized, and the device will search for the indoor units connected to your Wired
f
Remote Controller again.
ENGLISH-12
SOL WRControl_IM_04148A-00_EN.indd 12
2013-09-25 오전 10:29:09