Telephone Operation; Cordless Handset Programming - AT&T E5945B User Manual

RINGER: 1
DATE/TIME
1/01 12:00
NOTE: You can choose to set the
time manually, or you can allow it to be
set automatically with incoming caller ID
information. The time will be set automat-
ically only if you subscribe to the caller ID
service provided by your local telephone
company (see page 5). The date and
time for the answering machine need to
be set separately (see page 29).

Telephone operation

Cordless handset programming

Each cordless handset operates as an individual unit.
The ringer sound, ringer volume, date/time, dial mode
and language must be programmed separately for
each cordless handset. Follow the steps below to
program the cordless handset. To stop at any time,
press
Choose cordless handset ringer sound
. Press
2. Press
RINGER: and the current setting.
3. Press
4. Press
There will be a sample of each ringer tone.
5. Press
tone and exit.
NOTE:
off, and the screen will display RINGER OFF when the cordless handset is
idle (not in use). If there are any un-reviewed calls, the screen will display XX
MISSED CALLS instead of RINGER OFF.
Set cordless handset display date and time
. Press
2. Press
am
DATE/TIME .
3. Press
time.
4. Press
and time line at the bottom of the display, then press
SELECT
5. Repeat step 4 to set day, hour, minute, and AM/PM.
6. Press
/CLEAR.
OFF
to begin programming.
MENU
V ^
or until the screen displays
CID DIR
/
SELECT
TRANSFER
V ^
or to display , 2, 3, 4 or OFF.
CID DIR
/
SELECT
TRANSFER
If you choose OFF, the cordless handset ringer will be turned
to begin programming.
MENU
V ^
or until the screen displays
CID DIR
/
SELECT
TRANSFER
V ^
or to change the month in the date
CID DIR
.
/
TRANSFER
/
SELECT
TRANSFER
0
to change the current setting.
to choose the displayed ringer
to view or change date and
to save selection and exit.