Table of Contents
Advertisement
Getting started
Wall mounting
The base can be installed on any standard wallphone outlet as shown below.
Choose a location away from any electronic equipment, such as personal com-
puters, computer routers, television sets or microwave ovens. Avoid excessive
heat, cold, dust or moisture.
1) Connect telephone line cord and
power adapter to telephone jacks
and wall jacks, as shown on page 7.
2) Install wall mount bracket onto set.
(a) First put the two front wall mount
bracket tabs into the front notches
on the bottom of telephone base.
(b) Squeeze the rear tabs of the wall
mount bracket as you insert them
into the rear notches on the bottom
of the telephone base.
Plug power adapter into an electrical
outlet not controlled by a wall switch.
3) Position the wall mount
bracket over the wall outlet
mounting pegs, and press
and slide the wall mount
bracket down firmly so it is
held securely on the outlet
mounting pegs.
Plug telephone line
cord into the telephone
jack.
b
a
b
a
Advertisement
Table of Contents
