Equipment Control Module Leds; Wi-Fi Setup & Remote Access; Operation; Select System Mode (Em Heat/Heat/Off/Cool/Auto) - Aprilaire 8910W Owner's Manual

AbOUT yOUR NEW HOME COMFORT CONTROl

EQUIpMENT CONTROl MODUlE lEDs

pOWER/STATUS – On solid during normal operation . Flashes when
connection to the Home comfort control is lost, and at power-up while
the connection is being established.
HEATING – On when heating outputs are active .
COOlING – On when cooling outputs are active .
FAN – On when fan output is active .
HUMIDIFIER – On when humidifier output is active .
DEHUMIDIFIER – On when dehumidifier output is active .
VENTIlATION – On when ventilation output is active .
AIR ClEANING – On when air cleaner output is active .
WI-FI SETUp & REMOTE ACCESS
For detailed instructions for connecting the Home Comfort Control
aprilaire account, refer to the Wi-Fi Quick Start Guide included in the box. visit my.aprilaire.com for instructions
about using the aprilaire web and mobile apps.
6
to a Wi-Fi network and registering it to an
™

OpERATION

SElECT SySTEM MODE
(EM HEAT/HEAT/OFF/COOL/AUTO)
press [MODE] to select:
EM HEAT: (only for heat pumps with auxiliary heat) Home
comfort control controls auxiliary heat. Heat pump will not
operate in EM HEAT mode .
HEAT: Home Comfort Control controls only the heating system .
OFF: Heating and cooling systems are off .
COOl: Home Comfort Control controls only the cooling system .
AUTO: (if enabled in installer setup) Home comfort control
automatically selects heating or cooling depending on the
indoor temperature .
press [DONE] to save and exit, or [CANCEl] to exit without
saving. The Home comfort control will save and exit if nothing
is pressed within 10 seconds .

CHANGE TEMpERATURE SET pOINT

press
or to adjust the current set point.
(See Program Schedule Holds on pages 26-30 for
more information .)
7