INDOOR AIR QUAlITy FUNCTIONS
HUMIDITy CONTROl
(CONTINUED)
Humidity Control Screen with only Dehumidification Installed
If dehumidification is done with the air conditioner, the Home comfort control will cool up to 3°F beyond the
cooling setpoint for dehumidification. Note overcooling may not be sufficient to meet the dehumidification setpoint.
18
INDOOR AIR QUAlITy FUNCTIONS
FRESH AIR
press [FRESH AIR] on the Home screen to enter the
Fresh Air screen .
DEHUMIDIFIcaTION SETPOINT
DEHUMIDIFIER aDJUSTMENT
DONE BUTTON
(EXIT HUMIDITY CONTROL)
If ventilation is installed, Fresh air can operate in four
different modes .
Off: Ventilation will not run .
Automatic: ventilation will cycle based on the
parameters set by the installer to meet your home's
ventilation requirements .
3 Hour Event: ventilation will be constantly energized
for 3 hours and then the fresh air mode will return to Off
or Automatic (Hourly) depending on which mode was
most recently active . This option is used when fresh air
is needed. an example would be after cooking.
24 Hour Event: ventilation will be constantly energized
for 24 hours and then the fresh air mode will return to
Off or Automatic (Hourly) depending on which mode was
most recently active . This option is used when a large
amount of fresh air is desired. an example would be a
day with desirable outdoor conditions.
19