Table of Contents
Advertisement
6
Maintenance and cleaning
6.1 Filter Cartridge / Door Inner
Surface
Lint and fibres released from the laundry to the air
during the drying cycle are collected in the "Filter
Cartridge".
C
Such fibre and lint are generally formed
during wearing and washing.
C
Always clean the filter and the inner
surfaces of the cover after each drying
process.
C
You can clean the filter and filter area by
vacuum cleaner.
To clean the filter:
1. Open the loading door.
2. Remove the cover filter by pulling it up and open the
filter.
3. Clean lint, fibre, and cotton raveling by hand or with
a soft piece of cloth.
4. Close the filter and place it back into itsseat.
C
Clogging may arise on the filter surface
after using your machine for some time; if
this occurs, wash the filter with water and
dry it before using again.
C
Clean the entire inner surface of the cover
and door gasket.
Dryer / User Manual
6.2 Sensor (models equipped with a
sensor)
There are humidity sensors in your machine that detect
whether the laundry is dry or not.
For sensor cleaning;
1. Open the door of the machine.
2. Allow the machine to cool off if drying has been
carried out.
3. Wipe the metal sensors with a soft cloth, dampened
with vinegar and dry them.
C
Clean metal sensors 4 times a year.
A
Never use solvents, cleaning agents or
substances alike when cleaning as these
might cause fire and explosion!
25 / 28 EN
Hide quick links:
Advertisement
Table of Contents
