Led Status - Dukane 9010 User Manual

6LPSOH WURXEOHVKRRWLQJ DQG GH¿QLWLRQ RI
the LED indicators
The LED indicator on the
SURMHFWRU¶V UHDU SDQHO LV EOLQNLQJ
in red
1. During projection, the lamp
suddenly goes off and the
picture disappears.
2. The lamp does not turn on
even when the projector has
been turned on.

LED STATUS

STAND BY
Turns blue
The indicator is off
ON
Turns green
Flashes in green
The indicator is off
ERROR
Flashes once in red
Flashes twice in red
Flashes three times in red The cooling fan inside the projector is not working; seek assistance
Flashes four times in red The projector temperature is too high; try cleaning the ventilator
Turns Red
58
The lamp or the cooling fan could be faulty.
The lamp might have been damaged; check the LED
indicator on the rear panel of the projector and see if
it is blinking in red.
Indicates that the projector is in standby mode; this also means the
projector has not been turned on by pressing the SOFT POWER
button but has been connected to power.
This indicates that the projector has either been turned on and is
working normally or the projector is not connected to power.
This indicates that the projector has been turned on and is working
normally.
This indicates that the projector is currently warming up or
cooling down and will not respond to button operations.
This indicates that the projector is currently in standby mode.
The projector lamp is faulty; check to see if the lamp is damaged
or if it hasn't been properly installed.
The lamp cover is not properly replaced.
IURP D TXDOL¿HG VHUYLFH SHUVRQQHO
slots or unplugging the power cord to resolve the issue.
Please contact your dealer or service company.
5HIHU WR WKH GH¿QLWLRQ RI 3DJH  /('
STATUS ".
The lamp has reached the end of its service life;
please replace it.