④ Image setup: Click this option to display the [image setup] page.
⑤ Network setup: Click this option to display [Network setup] page.
❸ [System status] page
① Versions: Displays the firmware version of the projector.
② LAN status: Displays the LAN. connection status.
4 [General setup] page
① Enter old password: Enter the password for the configuration.
② Enter new password: Enter a new password.
③ Confirm new password: Re-enter the new password to confirm.
④ Power & source: Update settings.
⑤ Power: Switch on the power of the projector on / off.
⑥ Source select: Switch the input source of the projector.
❺ [Picture setup] page
59
6. Network control
①
②
①
②
③
④
⑤
⑥
①
②
③
④