Correcting Keystoning Caused By Projection Angle - Dukane 9010 User Manual

b. Press the MENU
to activate the Lens Control OSD, press enter to go through "Zoom/Focus", "Lens Shift",
"Zoom/Focus with Grid test pattern", "Lens Shift with Grid test pattern" OSD Cyclically.
Stop at either "Zoom/Focus" or "Zoom/Focus" with Grid test pattern" OSD; then use the
buttons to adjust the size of the image that is projected onto the screen.
Original image size

7. Correcting keystoning caused by projection angle

a. To adjust keystoning, press the MENU button on the remote control and choose
ALIGNMENT Æ Warp ÆKeystone adjust and use
b. To adjust keystoning, press the MENU button on the remote control and choose
ALIGNMENT Æ Warp Æ Keystone adjust and use
Keystone.
8. Turning off the projector
Press the button on the projector or the
turn off the projector. When the projector has been turned off, the cooling fan will remain in operation
for approximately 170 seconds.
button on the remote control and choose Alignment Æ Lens Control
Zoom out
–
–
Installation of the Projector
Zoom in
buttons to adjust Vertical Keystone.
buttons to adjust Horizontal
button on the remote control at least 3 seconds to
17