Installing Add-On Cards - ECS P4IBMS Instruction Manual

Installing Add-on Cards

This mainboard has three 32-bit PCI (Peripheral Components
Interconnect) expansion slots, one 4xAGP slot, and one
Communications and Networking Riser (CNR) slot.
4xAGP Slot The 4xAGP slot is used to install a graph-
ics adapter that supports the 4xAGP
specification and has a 4xAGP edge con-
nector. The 4xAGP slot only supports 1.5V
4xAGP and 2xAGP cards.
PCI Slots PCI slots are used to install expansion
cards that have the 32-bit PCI interface.
CNR Slot This slot is used to insert CNR cards in-
cluding LAN, Modem, and Audio functions.
Note: Before installing an add-on card, check the docu-
mentation for the card carefully. If the card is not
Plug and Play, you may have to manually configure
the card before installation.
26