Table of Contents
Advertisement
Typematic Rate Setting (Disabled)
If this item is enabled, you can use the following two items to
set the typematic rate and the typematic delay settings for
your keyboard.
•
Typematic Rate (Chars/Sec): Use this item to define
how many characters per second are generated by a
held-down key.
•
Typematic Delay (Msec): Use this item to define how
many milliseconds must elapse before a held-down
key begins generating repeat characters.
Security Option (Setup)
If you have installed password protection, this item defines if
the password is required at system start up, or if it is only re-
quired when a user tries to enter the Setup Utility.
APIC Mode (Enable)
This option enables/disables APIC (Advanced Programmable
Interrupt Controller) functionality. The APIC is an Intel chip
that provides symmetric multiprocessing (SMP) for its Pentium
systems.
OS Select For DRAM > 64 MB (Non-OS2)
This item is only required if you have installed more than 64
MB of memory and you are running the OS/2 operating sys-
tem. Otherwise, leave this item at the default.
HDD S.M.A.R.T Capability (Disabled)
The S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting
Technology) system is a diagnostics technology that monitors
and predicts device performance. S.M.A.R.T. software resides
on both the disk drive and the host computer.
Report No FDD For WIN 95 (Yes)
Set this item to the default if you are running a system with no
floppy drive and using Windows 95; this ensures compatibility
with the Windows 95 logo certification.
Small Logo (EPA) Show (Enabled)
Enables or disables the display of the EPA logo during boot.
44
Advertisement
Table of Contents
