Installing Add-On Cards - ECS L4S8A Manual

Installing Add-on Cards

This mainboard has five 32-bit PCI (Peripheral Components Interconnect)
expansion slots, one 8xAGP slot (supports 1.5V AGP Interface only), and one
Communications and Networking Riser (CNR) slot.
PCI Slots PCI slots are used to install expansion cards that have the 32-bit
PCI interface.
8xAGP Slot The 8xAGP slot is used to install a graphics adapter that supports
the 8xAGP specification and has a 4xAGP edge connector.
Note: The above layout is for reference only. The AGP slot
CNR Slot This slot is used to insert CNR cards with Modem and Audio func-
tionality.
Note: Before installing an add-on card, check the documentation for the card
carefully. If the card is not Plug and Play, you may have to manually con-
figure the card before installation.
may be different from your mainboard. Please refer to
actual shipment.
20