Tcp/Ip Network Setup Operating Procedures - Canon imageRUNNER 105 Network Manual

TCP/IP Network Setup Operating Procedures

To use a TCP/IP network, it is necessary to perform the following procedure.
1
3
2
3
IMPORTANT
•
It is recommended that the network manager perform steps 1 and 3 above.
•
This printer does not come with printer driver software that can be used on the UNIX
platform.
•
To print from a Macintosh, see "Chapter 6 Using an AppleTalk Network (Macintosh)."
•
Use the control panel or NetSpot when configuring the protocol settings for the first time.
After configuring protocol settings, you can change their content by using a web browser
(Remote UI).
3-2

TCP/IP Network Setup Operating Procedures

Protocol Settings (See "Protocol Settings," on p.3-3)
Specify the protocol settings. Use any of the following to specify the settings.
• Control panel
• NetSpot
• Web browser (Remote UI)
Computer Settings for Printing (See "Setting Up a Computer for Printing
(Windows/UNIX)," on p.3-27)
Specify the settings for each computer you use for printing.
Computer Settings for a File Server (See "Setting Up a Computer as a File
Server," on p.3-43)
Specify the settings of the computer receiving data sent from the machine.