Appletalk Network Setup Operating Procedures - Canon imageRUNNER 105 Network Manual

AppleTalk Network Setup Operating Procedures

To use an AppleTalk network, it is necessary to perform the following procedure.
1
2
6
3
IMPORTANT
•
It is recommended that the network manager perform step 2 above.
•
To configure settings with software other than the control panel of the machine or
NetSpot, TCP/IP protocol must be supported by your network environment.
6-2

AppleTalk Network Setup Operating Procedures

Macintosh Network Settings (See "Macintosh Network Settings," on p. 6-3)
Set up the Macintosh for connection to an Ethernet network.
Protocol Settings (See "Settings from the Control Panel," on p. 6-4)
Specify the protocol settings. Use any of the following to specify the settings.
• Control panel
• NetSpot
• Web browser (Remote UI)
Macintosh Print Settings (See "Setting Up a Computer for Printing," on p. 6-8)
Specify the settings for each computer you use for printing.