Network Environment Setup Operating Procedures - Canon imageRUNNER 105 Network Manual

Network Environment Setup Operating Procedures

To use the machine in a network environment, it is necessary to perform the
following procedure.
2
1
2
3
IMPORTANT
•
When configuring the interface settings for the first time, use the control panel of this
machine. After configuring the TCP/IP settings, you can change the content by using a
web browser (Remote UI).
2-2

Network Environment Setup Operating Procedures

Network Cable Connection (See the Printer Setup Guide)
Connect the network cables in accordance with the Printer Setup Guide.
Interface Settings (See "Interface Settings," on p.2-3)
Specify the interface settings for communication between the machine and computers on your network. Use
any of the following to specify the settings.
• Control panel
• Web browser (Remote UI)
Communication Environment Setup (See "Communication Environment
Setup," on p.2-11)
Set up a configuration for communication between the machine and computers on your network.