Use Case: Setting Up Wireless
To configure the SmartRG's Wireless interface:
1. Select Wireless -> Basic
Figure 21 Wireless - Basic Settings
2. Select "Enable Wireless."
3. Set the wireless access point's "SSID."
4. Select the "Country" from the dropdown list.
5. Click Apply/Save.
NOTE
The SmartRG provides support for 3 additional guest/virtual wireless access points.
S m a r t R G © 2 0 1 2
Configuring Your SmartRG™ - Common Use Cases
C o n f i d e n t i a l
P a g e
| 31