SmartRG™ Residential Gateways
Front Panel LEDs
The SmartRG's front panel LEDs can be useful for troubleshooting and diagnostic purposes. The
typical SmartRG front panel is shown below.
Figure 1 SmartRG Front Panel LEDs
The SmartRG front panel LEDs are defined as follows:
Power
WAN (SR500N/NE)
DSL
Internet
LAN 1-4
WLAN
P a g e
| 10
ON: Power is on. OFF: Power is off.
ON: Ethernet WAN Active. OFF: No link.
ON: Link established and active. OFF: No link. Blinking: Training mode.
ON: Internet connection established OFF: No Internet connection Blinking:
Data transfer on WAN Internet connection
ON: LAN link established and active OFF: No LAN link. BLINKING: Data
transfer on LAN port.
ON: WLAN enabled. OFF: WLAN disabled. Blinking: data transfer currently
occurring over the WiFi interface.
C o n f i d e n t i a l
S m a r t R G © 2 0 1 2