Use Case: Provisioning Your Smartrg For Remote Acs Management; Figure 18 Tr-069 Management Settings - SmartRG SR10 User Manual

SmartRG™ Residential Gateways

Use Case: Provisioning Your SmartRG for Remote ACS Management

NOTE This step is not required for production SmartRG gateways. SmartRG maintains an
"Activation Server" that associates MAC addresses with service providers' ACS
management URLs. After the SmartRG has established its WAN connection (using the
Connect-and-Surf algorithm) it connects to the SmartRG Activation Server and reports its
MAC. The Activation Server changes the ACS management URL to point to the service
provider's ACS.
To manually provision your SmartRG for management by a TR-069 enabled Automated
Configuration Server:
1. Select Management -> Management Server -> TR-069 Client.

Figure 18 TR-069 Management Settings

2. Enter the following parameter values:

Enable "Informs"

Set the "Inform Interval" to 7200 seconds

Set the "ACS URL" (e.g. http://myISP.acs.com/)

Leave the "ACS User Name" and "ACS Password" blank

Enable "Connection Request Authentication"

Set the "Connection Request User Name and Password" to admin/admin
3. Click Apply/Save.
NOTE Configure less and deploy more. Manage subscriber services and your entire gateway
fleet with the ClearVision® management system. Contact SmartRG to start your trial
today. See us at www.smartrg.com.
P a g e | 28 C o n f i d e n t i a l S m a r t R G © 2 0 1 2