Front Panel Leds; Table 1. Total Access 900E Series Leds - ADTRAN Total Access 908e Hardware Installation Manual

Total access 900e series
Hide thumbs Also See for Total Access 908e:
Table of Contents

Advertisement

Physical Description

Front Panel LEDs

Table 1 describes the front panel LEDs.
LEDs
Color
STATUS
Off
Green (flashing)
Green (solid)
POWER
Off
Green
Amber
VOICE
Off
Green (solid)
Green (flashing)
Amber
Red
DATA
Off
Green
Red
NET 1-4
Off
Green
Amber
Red
LAN 1-2
Off
Green (solid)
ETH 0/1-0/2
Green (flashing)
(Rear Panel)
Amber (solid)
Amber (flashing)
18
Total Access 900e Series Hardware Installation Guide

Table 1. Total Access 900e Series LEDs

Indication
Bootstrap mode - The boot code cannot be booted. During
bootstrap mode, VOICE, DATA, NET 1-4 LEDs will be red.
Unit is powering up. On power-up the STATUS LED flashes
rapidly for 5 seconds, during which time the user may escape to
bootstrap mode from the CRAFT port.
Power is on and the unit is functioning normally.
No power.
AC power is operational.
AC power has failed. Battery backup is active.
All ports are inactive.
At least one port is off hook.
At least one port is ringing.
At least one port is in test.
Fault condition.
Port is administratively shut down.
Layer 2 is up on a NET interface.
Layer 2 is down on a NET interface.
Port is administratively shut down.
Link is up and in normal operation.
Port is in test.
An alarm condition is present.
Link is down or port is administratively shut down.
10BaseT link is up.
10BaseT link is up and traffic is flowing.
100BaseT link is up.
100BaseT link is up and traffic is flowing.
Copyright © 2006 ADTRAN, Inc.
64240916L1-34D

Advertisement

Table of Contents
loading

This manual is also suitable for:

Total access 916eTotal access 924e

Table of Contents