Battery Backup Unit
Total Access 900e Series Hardware Installation Guide
Battery Backup Unit Safety Notices
The Battery Backup Unit should only be used in specified ADTRAN applications.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including that which may cause undesired operation.
Wall Mounting the Battery Backup Unit
For a wallmount installation, the BBU installs on heavy plywood (3/4-inch minimum) using two
#10 x 3/4-inch pan-head wood screws. Install the BBU as follows:
Figure 7 shows the BBU mounting dimensions for the Total Access 900e Series.
Figure 7. Wall Mounting the BBU
26
Copyright © 2006 ADTRAN, Inc.
64240916L1-34D