Scanner Model Panel Options - Xerox DocuMate 5445 User Manual

Black Level
With this option you can set what the scanner should interpret as "black" in the final image. If you are scanning
items that have notes written with a pencil, you may want to raise the black level to have the pencil notes appear
black in the image. You can set a value for black from 0 to 127. If you set this value to 127, you are telling the
scanner that all pixels that are grey level 127 or lower (darker) should appear as black in the final image. This option
is only available when scanning in Color or Gray.

Scanner Model Panel Options

This panel contains options that are specific to the scanner model you are using.
Automatically Adjust Brightness and Contrast
Select this option to have the scanner automatically adjust the overall lightness or darkness of the output scan.
When you select this option these features in the scanning interface will be disabled:
• Brightness
• Contrast
• Gamma
• White level
• Black level
® ®
Xerox DocuMate 5445 / 5460
User's Guide
179