Operation - Belkin F1DN102F-3 User Manual

oPeraTIon

SECTIONS
Table of Contents
operating the belkin secure flip KVM switch
self-Test Procedure
As product powers-up it performs a self-test procedure. In case of
self- test failure for any reason, including jammed buttons, the product
will be Inoperable. Self-test failure will be indicated by the following
abnormal LED behavior:
• All channel-select LEDs will be turned ON and then OFF;
• A specific, predefined LED combination will be turned ON;
• The predefined LED combination will indicate the problem type
(jammed buttons, firmware integrity).
Try to power cycle product. If problem persists please contact your
system administrator or technical support.
Illuminated Push buttons
The default channel is #1 upon powering up.
The user can select the other channel by pressing the other push
button. The mouse cursor will be positioned at the center of the
selected computer display.
The selected channel is indicated by the appropriate push button being
illuminated.
The video, keyboard, mouse and audio will follow the selected channel
once pressing the push button.
Belkin Advanced Secure 2-port Flip KVM Switch User Manual
1 2
18
3 4 5 6