Table of Contents
Advertisement
CoMMon aCCess CarD (CaC) ConfIGUraTIon anD oPeraTIon
CoMMon aCCess CarD (CaC) ConfIGUraTIon anD oPeraTIon
SECTIONS
Table of Contents
CAC connection to the computer requires a separate USB cable connection and
allows the user to specify whether there is a CAC required for that computer or not.
This allows the CAC to be connected and controlled separately to the keyboard,
mouse, video and audio.
belkin
Belkin
Universal 2nd Gen secure DP/HDMI to DP/HDMI KVM switch
Universal 2nd Gen Secure DP/HDMI to DP/HDMI KVM Switch
®
®
1
2
3
step 1 – Installation
1.1
1.2 If only some of the computers use CAC functionality, make sure that computer
1.3 If CAC is connected it is automatically enabled.
note: Make sure that the CAC switch is disabled (left) for all other non-connected
CAC systems.
1.4 Once configured, the CAC connection will be switched only when required by
21
4
5
Using the included USB cable, connect one end of the cable to the computer
that requires CAC, and the other end to the CAC port on the Belkin Advanced
Secure DisplayPort KVM that corresponds to the computer.
#1 is connected to the CAC device. If needed, switch channels/computer
mapping to create this configuration.
the connected computer. When switching from a CAC enabled port to a non-
CAC enabled port, the CAC connection can be frozen to the CAC enabled port
by pressing the CAC enabled channel button 3 times in rapid succession. The
CAC freeze light will illuminate. To disable CAC freeze, press the channel button
three times in rapid succession to remove the freeze.
6
7
baCK To Table of ConTenTs >
Advertisement
Table of Contents
