Please Read Immediately; Important Information; Intended Use; Legal Regulations And Directives - Dimplex LAS 10MT Installation And Operating Instructions Manual

1
1 Please Read
Immediately

1.1 Important Information:

ATTENTION!
When transporting the heat pump, ensure that it is not tilted more than
45° (in any direction).
ATTENTION!
The heat pump and transport pallet are only joined by the packing film.
ATTENTION!
Do not restrict or block the area around the air intake or outlet.
ATTENTION!
Ensure that there is a clockwise rotating field (for multiphase devices):
Operating the compressor in the wrong rotational direction could cause
damage to the compressor. Incorrect phase sequence causes wrong
rotational direction of the ventilator and, thus, a significantly reduced
performance.
ATTENTION!
Never operate the heat pump without water flow!
ATTENTION!
The flow monitor must be designed for the required volume flow and
ensure permanent interconnection.
ATTENTION!
Never use cleaning agents containing sand, soda, acid or chloride as
these can damage the surfaces.
ATTENTION!
Before opening the device, ensure that all circuits are isolated from the
power supply.
ATTENTION!
The warranty does not cover damage caused by inadequate lay-up
measures during the winter.
ATTENTION!
Work on the refrigerating circuit may only be performed by competent
personnel.
E-2

1.2 Intended Use

This device is only intended for use as specified by the manufac-
turer. Any other use beyond that intended by the manufacturer is
prohibited. This includes the user's abiding by the manufacturer's
product brochures. Please refrain from tampering with or altering
the device.
1.3 Legal Regulations and
Directives
The construction and design of the heat pump complies with all
relevant EU directives, DIN/VDE regulations (see CE declaration
of conformity).
When connecting the heat pump to the power supply, the rele-
vant VDE, EN and IEC standards are to be fulfilled. Any further
connection requirements stipulated by local utility companies
must also be observed.
When connecting the heating system, all applicable regulations
must also be adhered to.
Persons, especially children, who are not capable of operating
the device safely due to their physical, sensory or mental abilities
or their inexperience or lack of knowledge, must not operate this
device without supervision or instruction by the person in charge.
Children must be supervised to ensure that they do not play with
the device.
1.4 Energy-Efficient Use of the
Heat Pump
To maintain heat pump efficiency, it is particularly important to
keep the temperature difference between the domestic hot water
and heat source to a minimum.
Suitable heating water temperature, a carefully chosen location
for the open-air pool, and the use of heat insulating pool covers
are just some of the measures used to reduce heat energy re-
quirements.
It is important to ensure that the heat exchangers are not con-
taminated during operation because this increases the tempera-
ture difference, in turn reducing the COP.