Fastening The Adapter Cover; Using The Security Bar And Slot - Dukane 8970 User Manual

Fastening the adapter cover

When using the USB wireless adapter, be
sure to connect the adapter to the further
USB TYPE A port from the LAN port and
use the supplied adapter cover.
1.
Loosen the screw (marked with
triangle) on the bottom left of the
USB TYPE A ports.
2.
Insert the tab of the cover into the
hole at the upper right of the USB
TYPE A ports in the direction of the
arrow.
3.
Align the screw holes on the projector and the cover. Then
insert the screw removed from the projector into the hole
and tighten the screw.
WARNING
to put in the mouth.
►Heat may build up in the USB wireless adapter, to avoid possible burns
disconnect the projector power cord for 10 minutes before touching the adapter.

Using the security bar and slot

A commercially available anti-theft chain or
wire can be attached to the security bar on
the projector. Refer to the fi gure to choose
an anti-theft chain or wire.
Also this product has the security slot for
the Kensington lock.
For details, see the manual of the security
tool.
WARNING
from falling down, since it is not designed for it.
CAUTION
It may become too hot.
NOTE
• The security bar and slot is not comprehensive theft prevention
measures. It is intended to be used as supplemental theft prevention measure.
• The safety bar (4) can be used for the same purpose as the security bar.
►Keep small parts away from children and pets. Take care not
►Do not use the security bars and slot to prevent the projector
►Do not place anti-theft chain or wire near the exhaust vents.
1
11mm
Anti-theft
chain or wire
security bar
Setting up
2
Tab
3
Security slot
19mm
15mm
15