Selecting An Input Signal - Dukane 8970 User Manual

Operating

Selecting an input signal

1.
Press INPUT button on the projector.
Each time you press the button, the projector
switches its input port from the current port as
below.
COMPUTER IN1  COMPUTER IN2  LAN
VIDEO
S-VIDEO
COMPONENT  HDMI 2  HDMI 1
NOTE
• If you have set SKIP to some ports from SOURCE SKIP in the
OPTION menu, the input from the ports cannot be selected (63).
• While ON is selected for AUTO SEARCH item in OPTION menu, the projector
will keep checking the ports in above order repeatedly till an input signal is
detected (63).
• It may take several seconds to project the images from the USB TYPE B port.
1.
Press COMPUTER 1 / 2, LAN, USB TYPE A / B, HDMI 1 / 2, COMPONENT,
S-VIDEO or VIDEO button on the remote control.
The port corresponding to each button is selected as below.
Button
COMPUTER 1
COMPUTER 2
LAN
USB TYPE A
USB TYPE B
HDMI 1
HDMI 2
COMPONENT
S-VIDEO
VIDEO
NOTE
• While ON is selected for AUTO SEARCH item in OPTION menu,
the projector will keep checking every port sequentially till an input signal is
detected (63).
• It may take several seconds to project the images from the USB TYPE B port.
26
USB TYPE A
USB TYPE B
Ports
COMPUTER IN1
COMPUTER IN2
LAN
USB TYPE A
USB TYPE B
HDMI 1
HDMI 2
COMPONENT
S-VIDEO
VIDEO
INPUT button
Buttons for input
ports