Table of Contents
Advertisement
Fastening the adapter cover
When using the USB wireless adapter, use the supplied adapter cover for theft
prevention.
USB wireless adapter: USB-WL-11N
Loosen the screw on the bottom left of the WIRELESS port.
1.
Insert the tab of the cover into the hole at the upper right of the WIRELESS
2.
port in the direction of the arrow.
Align the screw holes on the projector and the cover. Then insert the screw
3.
removed from the projector into the hole and tighten the screw.
WARNING
to put in the mouth.
►Heat may build up in the USB wireless adapter, to avoid possible burns
disconnect the projector power cord for 10 minutes before touching the adapter.
Temperature range: 0 ~ 40°C(operating)
►Keep small parts away from children and pets. Take care not
Tab
Setting up
2 1
Advertisement
Table of Contents
