Troubleshooting; The Machine Will Not Start; The Machine Loses All Power During A Program; Drying Takes Too Long - Asko T754 W Operating Instructions Manual

Troubleshooting

The machine will not start

Check:
• that the door is properly closed.
• that the main power switch is on.
• that the Delayed Start option has not been
selected. To cancel Delayed Start, press the
Stop button for three seconds.
• that any plug is connected.
• that the house fuses or circuit breaker have
not been tripped.
• that the overheating cut-out has not been
triggered.
The machine loses all power during a
program
The overheating cut-off shuts off the tumble
dryer if the temperature is too high, caused by
lint clogging the lint filter, for instance.
• Clean the lint filter.
• Wait until the machine has cooled, then try
starting it. If it still does not start: Call the
Customer Care Center.

Drying takes too long

• Check that the lint filter is not blocked. See
the Care and maintenance instructions
chapter.

Error messages

If F30 is flashing on the display, the maximum
permitted program time has been reached.
Check that the lint filter is not blocked. See the
Care and maintenance instructions chapter.
Customer Care Center
1-800-898-1879
www.askona.com
15