G 600/G 800
6.8.12.3.2 Deleting Stored Fault Codes
Access Programming Mode and press Start/Stop twice.
6.8.12.3.3 Operating Hours
1. Access Service Mode 2.
2. Press the appropriate program button indicated in Table 6-66 to display operating hours.
Program button
Sani Wash
Normal Plus
Table 6-66: G 898 Operating Hours
Example:
Sani Wash: 007
Normal Plus: 127
Total operating hours: 7.127 hours
Incognito Models
6.8.13
G 803, G 643, G 843, G 663, G 863
(G 803 shown)
Enter Programming Mode
Enter Service Mode 1
Enter Service Mode 2
Table 6-67: G 803, G 643, G 843, G 663, G 863 Programming Flow Chart
6.8.13.1
Programming Mode
1. To access the Programming Mode close the door and turn the dishwasher on.
All program lights should light. If not, press the Start/Stop button to cancel the
program. Turn the dishwasher off.
2. Press and hold the 1 and 3 buttons while turning the dishwasher on. A blinking
Salt light indicates successful accessing of the Programming Mode.
3. To toggle functions on or off, press the appropriate program button (1 to 4)
indicated in Table 6-68 below to modify the corresponding function.
4. To save: After selecting options, press program button 6 twice and turn off the
dishwasher.
Display
First 3 digits of total operating hours
Last 3 digits of total operating hours
Programming Flow Chart
To access:
Water hardness settings
Heated drying
Increased water intake
Buzzer
To access:
Manual step mode
Component test program
To access:
Error messages
Program index
Increased water temperature selection
Water softener
Interim rinses
Dishwasher width setting
125
Technical Information