Message Counter Displays - AT&T E1812B User Manual

Message counter
Answering system operation

Message counter displays

The message counter usually displays the total
number of memos and incoming messages. See
this counter.
Message counter displays
(flashing)
(flashing)
(counting)
(flashing)
(flashing)
(or)
, , ,
, ,
39 39
No messages.
The clock needs to be set (page 34).
Total number of messages and memos,
or message number currently playing.
Total number of messages and memos.
The number flashes when there are new
(un-reviewed) messages.
If the telephone loses power, after power is
restored, the number in the message coun-
ter will flash to indicate the clock needs to
be set.
Current remote access code while setting
(page 36).
Elapsed time while recording a memo
(page 38) or announcement up to 90
seconds (page 35).
Memory is full. Messages must be deleted
before new messages can be received.
System is answering a call, being accessed
remotely, or the clock is being set.
System is being setup or initialized.
ing system setting is turned on or off.
Current number of rings while setting
(page 36).
base speaker volume is being adjusted.
base ringer volume is being adjusted.
-