AT&T E1812B User Manual page 49

Troubleshooting
The CHARGE
light is off
There is no dial
tone
The telephone
does not ring
when there is
an incoming
call
sets and telephone base each month using a pencil eraser
or a dry non-abrasive fabric.
plugged in correctly and securely.
plugging it back in. Allow up to one minute for the cordless
handset and telephone base to reset.
the Limited warranty section of this user's manual for
further instruction.
It might be out of range.
installing a new telephone line cord.
and connect a different telephone. If there is no dial tone
on the telephone either, the problem is in your wiring or
local service. Contact your local telephone company.
are plugged in properly (page 6).
base. Move it closer to the telephone base.
line to allow all of them to ring simultaneously. Try unplugging
some of them.
problem, the problem is in the wiring or local service.
Contact the local telephone company (charges may apply).
cordless telephone. Try installing your telephone as far
away as possible from the following electronic devices:
wireless routers, radios, radio towers, pager towers, cel-
lular telephones, digital telephones, intercoms, room
appliances, and other cordless telephones.
46
-